Rixson

No. 27 & 28 Door Closers –
Concealed in the floor

Model 27 (Offset Hung) and Model 28 (Center Hung) install in the concrete beneath the surface of the floor for total concealment. They feature heavy duty hydraulic mechanism for reliable, consistent performance.

Model 27 (Offset Hung) is installed to provide a pivot ¾" from the face of the door and ¾" from heel edge of the door. Model 28 (Center Hung) is installed 2 ¾" from the door frame. Both models are single acting (opening in one direction only).

Both models come complete with a bottom arm, top pivot, cement case and floor plate. Intermediate pivots are recommended for total door alignment on offset hung models.

FEATURES: (Model 27 - 28)
BEST SUITED FOR: Heavy Traffic Doors
MAX DOOR WEIGHT: 450lbs.
DEGREE OF OPENING & DEAD STOP: 85°, 90°, 95°, 105°
SPECIAL FEATURES: Selective, Automatic or Non-Hold-Open

For information on other available models please call 1-800-457-5670

350 Series Gate Closers

Rixson offers other specialized door closers featuring exceptional durability, vandal-resistant concealment and minimal maintenance. Accessories are available for these closers and can be custom designed to accommodate any special condition.

FEATURES: 350 Series gate closers
BEST SUITED FOR: Non-handed, quiet control of partition mounted gates
MAX DOOR WEIGHT: 75lbs.
DEGREE OF OPENING: 140°, 90°
CLOSER TYPE: Pivot Hung, Butt Hung

No. M2000 Series Door Closers Surface Mounted

The M2000 Series (cast iron) and M2220 Series (aluminum) surface closers feature cold rolled straight steel arms, full steel covers that accept plated finishes, field adjustable valves for latch and closing speeds, adjustable backcheck for intensity, plus a wide range of arm and bracket applications to suit most door and frame conditions.

OPTIONAL ARMS: Hold-open, heavy duty, and cushion stop (Chek-Stop)

Pivots and Pivot Sets Superior Door Hanging

Pivot sets have been recognized for years as the best way to hang a door because the weight of the door is supported by the floor instead of the door frame. Pivot sets are available for doors weighing up to 1,500 pounds. (Intermediate pivots must be used with the F Series and are recommended for all application.)

Pivot sets include both top and bottom pivots. Intermediate pivots are recommended for offset applications. Pivots for electric power transfer and door position indicators are available for both offset and center hung applications.

Thresholds

Thresholds help protect doorways and provide an attractive, finished look to the door opening. Rixson thresholds can be readily used will all types of door closing mechanisms. See our catalog section entitled "Thresholds" for specific models and sizes.

Electro-Magnetic Door Releases

Rixson's electro-magnetics are designed specifically to hold fire and smoke barrier doors until released by a remote smoke detector or other switching device. The complete assembly consists of an armature contact plate with adjustable pivot mounting for installation on the door and heavy-duty electro-magnets mounted on the wall or floor behind the door.

Overhead Holders & Stops

The industries widest assortment of auxiliary stops and holders are available from Rixson's Checkmate. Surface mounted, concealed, heavy duty, and medium duty models add life to all door and frame assemblies.

New multi-function standard duty 2 and 10 series can be set to any door opening degree after installation. Checkmate is the #1 name in stop and holder value and flexibility,