LCN

1000 Series Surface
Mounted Closers
Slim line design for narrow head frames and top rails. Cast iron cylinder for exceptional service life. UL listed for use on fire-rated doors. All weather hydraulic fluid eliminates seasonal adjustments. Ten year warranty. All powder coat finishes available

 

ADA: Size 1 closer provides less than 5.0 lbs. opening force on 36" wide doors.

1460 Series 1460 Series The 1460 SUPER STOCK is a fully universal double lever arm, slim line closer designed for use on narrow head frames and top rails. A wide choice of options, mounting accessories and ease of installation offer maximum versatility. New features: Optional designer series metal cover Stick-on template RapidorTM mounting bracket Rotation indicator Features/Benefits Standard 1460 series closer shipped with regular arm (non-hold-open), a slim line non-metallic cover, and self-reaming and tapping screws. Closer mounts hinge side, top jamb, and parallel arm on either right or left swinging doors. Non-sized (1-6) cylinder is adjustable for interior doors to 5'0" and exterior doors to 4'0". Arms: Regular, hold-open, fusible link, heavy duty, extra duty, Cush-N-Stop, and Spring Cush. 1460T Series 1460T Series The 1460T SUPER STOCK is a fully universal slim line, single lever (track) arm closer designed for interior use on narrow headframes and top rails. The modern styling and small projection make it an excellent choice for interior doors. New features: Optional designer series metal cover Stick-on template RapidorTM mounting bracket Rotation indicator Features/Benefits Standard 1460T series closer shipped with a standard arm, a slim line non-metallic cover, a regular track (non-hold-open), a track roller, and self-reaming and tapping screws. Non-handed closer mounts hinge side, top jamb (pull side), and stop side on either right or left swinging doors. Non-sized (1-6) cylinder is adjustable for interior doors to 4'0". Arms: Regular, hold-open, fusible link, extra duty, and Cush-N-Stop. 1370 Series Applications For aluminum, hollow metal, or wood doors and frames Can be used with hinge or pivot mounted doors Mounts on 1-3/4" transom without adapter plates Adapter plate available for unusual conditions Features/Benefits Cast iron construction Forged steel components Three regular arm mountings Adjustable ANSI Size 1-5. Reduces SKUs required Single arm punch for accurate pre-loading No measure mounting template for accurate installation Significant reduction in installation time Unique Rapidor™ mounting bracket for easy installation Easy to use, step-by-step mounting instructions Meets ADA requirements All weather hydraulic fluid Adjustable back check Contemporary design Uniform finish on all components Custom powder coat finish SRI primer for installation in corrosive conditions 10 year warranty Options Hold-Open arm Parallel Arm available Delayed action cylinder 1520 Series Non-handed Three regular arm mountings Separate regulation of main and latch speeds Size 1-4 closing power Adjustable backcheck Standard metal cover Warranty: Five years All LCN finishes available ISO 9001 Optional extra cost accessories include Hold-open arm, Track arm, Thru-bolt, screw pack; Spring cush arm,2nd Hold-open spring cush arm Maximum door widths: 1100mm (42") Tested to over 2 million cycles Case quantities only     Reveal Min. Top Rail Min. Frame Max. Opening Hinge Face Max. 6mm (7/32") 60mm (2 3/8") 35mm (1 3/8") 180° Top Jamb Max. 102mm (4") *38mm (1 1/2") 60mm (2 3/8") 180° Parallel Arm Min. 25mm (1") *114mm (4 1/2") n/a 180° * Below frame stop