Leading The Industry In Tubular Key Cutting

Framon's TKM-100 is known throughout the industry as the foremost machine in tubular key cutting. Everything you need to originate almost any tubular key in use today is included with the TKM-100:

TKMS451	Dial Indicator		TKMS355	Reed Tubular Code Book
F2MS899	Demonstration Video	TKSH107	Chicago/Dynalock/Unican Cam
TKSH109	Fort/American Cam	TKMS102	Ace Spacing Plate
TKMS103	Offset Right Plate	TKMS104	Offset Left Plate
TKMS105	National Keyset Plate	TKMS106	Ace Change-a-Matic Plate
TKMS107	Segal 8 Pin Plate	TKMS108	Universal Spacing Plate
F2MS402	1/8" Allen Wrench	ASMS003	3/16" Allen Wrench
DCMS402	3/32" Allen Wrench

One Collet For All Your Needs....

The TKM-100 features a collet that can accommodate all three size tubular keys. No fumbling with changing jaws or adapters. Simply tighten the chuck closer - the self adjusting collet easily accepts any size key.

Make Any Type Of Cut And Lots Of Them!

With the TKM-100 you can make regular cuts, ward cuts, and master cuts. The machine is equipped with a carbide cutter, which means you can cut brass or steel and get long cutter life.

Why Code Cut When You Can Duplicate?

Probably more than any other type of key, a tubular key wears very quickly. Due to the constant pressure on the face of the key, even original keys can be off .003" - .005"! By using a duplicator to make a key, an inaccurate copy of a worn key is being made. When you use the TKM-100 to code cut a key, you'll be making an original key, accurate to .001". A precision dial indicator is included with the machine, and decoding takes only a few seconds.