ACELOGO.gif (4240 bytes)

Framon Manufacturing


Framon Code Machine Accessories


Optional Accessories For The #1 Or #2 Code Machine


Double Sided ViseDOUBLE SIDED VISE
This vise will hold the wide, deeply milled blanks such as X160, X161, X176 and X184 that tend to tip in the standard vise. The reverse side of the vise has a built-in tip stop and special millings to hold all of the interchangeable core keys firmly. The vise eliminates the need for shims and wires to hold these blanks. Fits Framon #1 or #2 Code Machines. PART NO. F2SH050



Spacing Block SetSPACING BLOCK SET FOR DOMESTIC AND IMPORT SPACING
60 different spacings from .045" to .170". Includes Ford 10 wafer spacing and VB series with double cuts. These blocks snap in and out of the spacing block holder and fit all existing Framon Code Machines. Also included is a new spacing clip for tip-stopped keys. PART NO. FSB1001

Safety Deposit BlocksSPACING BLOCK SET FOR SAFETY DEPOSIT BOX KEYS
Offered in three different kits: The F2MSDB1 includes three safety deposit blocks with spacing for Diebold, Mosler, HHM, S & G, York, etc. The F2MSDBC2 includes the blocks plus .055", .066" and .088" high speed steel slotters. The F2MSDBC3 includes the blocks and  carbide slotters.

 

MEDECO KEYMARK™ VISE
Originally, a special vise was needed to cut Medeco KeyMark keys. Our F2SH050 Double Sided Vise will now hold KeyMark keys without tipping. 


Tibbe FixtureTIBBE KEY ATTACHMENT
An attachment for cutting Tibbe keys. This unit will fit all Framon Code Machines and comes complete with a .088" carbide slotter and instructions for use. This unit will cut both the 6 and 8 wafer Tibbe keys that are used on Ford and Jaguar autos. These keys can now be cut quickly and accurately at a very low cost to Framon Code Machine owners. PART NO. F2SH070

 


Depth & Space Manual, 1997 EditionDEPTH & SPACE MANUAL - VOLUME  9, 10/99
This edition contains depth and space information for domestic, import, flat steel keys and safety deposit keys. It's the largest and most comprehensive depth and space manual available. Newly formatted in 1996, the Depth & Space Manual gives progressive spacings as well as spacing block reference numbers. PART NO. F2MS350 (If your binder is in good shape, save money & order the filler pages only: PART NO. F2MS355)


FRAMON REPLACEMENT PARTS


 

Description Part #
Drive belt F2MS601
Key Stop F2MS551
Standard Vise F2SH060
Depth Plate (.100, .150 markings) F2MS102
Dial Indicator F2MS103
Depth Plate Pointer F2MS104
Spacing Block Indicator F2MS105
Compression Spring (vise springs, 5 pack) F2MS001-PK5




Web Author: The Man-JG
Copyright ©1998 by Ace Lock & Security Supply - ALL RIGHTS RESERVED