ACELOGO.gif (4240 bytes)

Framon Manufacturing

Locksmith Tools From Framon Manufacturing Company

IMPRESSIONING TOOL - PLUG HOLDERS
DIAL CALIPERS - DIAL INDICATOR

These four tools make a handy addition to any lock shop. They've been tested regularly in our own lock shop. Read on for the details...

IMPRESSIONING TOOL - Part #IMMS001

A best-seller from Framon that makes key impressioning easier than ever. This tool is self-contained; it needs no wrenches and has no screws to strip out. This tool holds practically any key blank; keys will not rock or slip. The firm hand grip provides complete control when impressioning keys.

"I recently purchased your Key Impressioning Tool and had the opportunity to use it today and discovered how GREAT it works!!! I would recommend this remarkable tool to any and all Locksmiths. It is a hands down choice over all other Key Impressioning Tools on the market. As always, FRAMON comes through again as the premiere Locksmithing tool company!!!!"

Unsolicited remarks from a satisfied and grateful customer,
Ron Armstrong,RL
CharterClearStarMember#0088
Armstrong Lock & Safe
139 McClellan Street
Philadelphia, PA 19148-1901

PLUG HOLDER SET - Part #PHSH001

Plug vises that are adaptable for plugs from .480" diameter to .550". These vises can be hand held or secured in a bench vise. Only two vises are needed. Plugs, when loaded, will rotate in vises in the same manner as in the cylinder shell. Vise can be adjusted to any tension. The key blank will not drop below the radius of the plug so that the shear line can be maintained. High pins will show up when the plug is rotated. Made from solid steel for durability with the usual Framon precision.

6" DIAL CALIPER - Part #F2MS451

Easy to read and extremely accurate. This caliper can be used for decoding keys, checking key machine accuracy, and plenty of other uses around the lock shop. The calipers are made of stainless steel and have .001" graduations.

DUAL READ DIAL INDICATOR - Part #TKMS451

For locksmiths doing tubular key work, this dial indicator is a must. Use it for decoding keys or checking machine accuracy. Easy to read and simple to use. Graduations in .001".