The #9200 Surface Mounted Door Status Switch Assembly
provides a means of low cost door position reporting
when concealment isn't possible or not important. Most
frequently used for door interlocks and local/remote
door monitoring.
Clearly marked SPDT contacts rated at .5A @ 30V. Color
Brown.
For more information, see the Adobe Acrobat files below:
The #9250 Mortise Mounted Door Status Switch Assembly provides a
means of concealed door position reporting. Most frequently used
for door interlocks and local/remote door monitoring.
Clearly marked SPDT contacts rated at .5A @ 30V. Finish US28D
may be painted or anodized to match door frame.
For more information, see the Adobe Acrobat files below:
#9275 and #9280 Mortise Mount Ball type door status switch
assembly is recommended when mortise mounting, but not
necessarily total concealment is required. Switch contact rating
is higher than the Series #9200 and #9250. The switch body is
adjustable in the mounting plate to accommodate 1/16" thru 1/4"
door gaps. An overtravel feature is built-in to the assembly
preventing damage to the switch. SPDT Switch contact ratings for
the #9725 and DPDTswitch contact rating for #9280 are 1A at 120
VAC. The #9280 is frequently used when the primary set of SPDT
contacts are used for isolated door position monitoring and the
second set of SPDT contacts are used for interlocks or
interfacing with auto door equipment.
For more information, see the Adobe Acrobat files below:
